Gear Aid Aquaseal+FD Repair Adhesive + Cure Accelerator
The Gear Aid Aquaseal+FD Repair Adhesive + Cure Accelerator has all you need to repair gaskets and fabric, sprayskirts and all types of watersports gear. Repairs are waterproof, flexible, strong and highly abrasion resistant.
- You get a 3/4 oz tube of Aquaseal Repair Adhesive & Sealant, .34 ounce of Cure Accelerator and Cleaner and a handy applicator brush.
- When you mix 1 part Cure Accelerator with 3-4 parts of Aquaseal, you can get a completely cured repair within 2 hours. This is a great kit to take with you on the water.
- Make permanent repairs in all types of outdoor gear.
- Repairs are ultra-strong, flexible and washable. Urethane is highly abrasion resistant, so Aquaseal makes great wear patches.
Product Tips
Click here to download instructions.
- Cure Accelerator contains a thickening agent to comply with certain child safety laws. After setting for a while it can settle out and thicken. To return it to a liquid state, shake it for at least a minute. And always keep it tightly closed to prevent evaporation.
- Aquaseal is a moisture-cure adhesive. To prevent the unused portion from hardening in the tube, follow these simple steps: Squeeze Aquaseal right up to the opening so there's no air pocket. Then put some vaseline on the threads before screwing on the cap. Now put the tube in a zip-seal bag and store it in the freezer. When you're ready to use the tube again, warm it at room temperature or in the bag in warm water and you're good to go!
Need a fast fix for torn gear? Use Aquaseal FD repair adhesive and Cure Accelerator (formerly Cotol-240) to quickly tackle rips and tears in waders, wetsuits and muckboots. Aquaseal FD is a clear and waterproof urethane adhesive that comes in a 0.75 oz tube. It offers excellent abrasion resistance and can withstand constant pulling and movement. Using Aquaseal FD with the Cure Accelerator together and be back in the water within two hours. This formula also improves gear repairs by cleaning the surface and shortening tack time to 15 minutes. For a speedy solution to gear failures, use Aquaseal FD and Cure Accelerator.
| Weight: | 2.6 oz |
|---|---|
| Includes: |
|
| Notes: |
|
Material: Thermoset urethane
Adhesive Size: 0.75 oz
Color: Clear
Adheres to: Neoprene, rubber, nylon, canvas, vinyl/PVC
Cure Time: 2 Hrs with cure accelerator
Application Temperature: 60° to 100°F
Use Temperature: -20° to 180°F
Storage: Store in bag in freezer
Made in USA
Learn how Aquaseal FD and Cure Accelerator Works
 |
 |
 |
 |
| Step 01 | Step 02 | Step 03 | Step 04 |
| Clean and prep the area. Thoroughly clean and dry the surface around the tear. Remove dirt, oils, and debris to ensure the adhesive bonds well. | Mix Cure Accelerator and Aquaseal FD. Mix in a small disposable container, and then apply a thin, even layer of Aquaseal FD over the tear or hole. | Let it cure. Lay the item flat and allow the adhesive to cure for 2 hours (vs. 8-12 hours without Cure Accelerator). | Get back out there. Once fully cured, the flexible, waterproof seal is ready for action — so your gear is too. |
This product can expose you to Toluene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. More about California Proposition 65 »