***IN STORE PICK ONLY - WILL NOT SHIP***

System 6™ is a two part urethane coating that can be applied to Hypalon/Neoprene boats. The Hypalon kit includes Accelerator and Hypalon Primer. It is both abrasion resistant and flexible when fully cured. It dries to the touch overnight and the special accelerator in each kit creates a full cure in 4 days (10 days if used without the accelerator, accelerator INCLUDED).

System 6™ is easy to mix because you combine equal parts of Part A and Part B. However, if you are going to add pigment you must add the pigment to Part A first and then combine with Part B. To match the color of your boat stir in our special System 6™ Stay True Color™ Stable Pigment. (SOLD SEPARATELY)

The kits listed are to be applied with a brush or a short nap roller. Coverage estimates are for 30-40 mil thickness (0.03″-0.04″) – thinner applications will cover more.

1 Pint Kit covers about 3 sq. ft.

1 Quart Kit covers about 6 sq. ft.

1/2 Gallon Kit covers about 12 sq. ft.

1 Gallon Kit covers about 24 sq. ft.

2 Gallon Kit covers about 48 sq. ft.

CLICK HERE FOR DETAILED INSTRUCTIONS

PLEASE PAY SPECIAL ATTENTION to when the pigment gets added to part A of the System 6